Using the greenhouse model "Agronom" can be considered one of the most optimal solutions in terms of efficiency and ease of use, as well as simplicity and reliability of the design.
These factors, combined with the use of modern materials, distinguish it in the line of classic greenhouses and provide an opportunity get decent results when growing seedlings in open ground.
In the spring, when significant changes in temperature and humidity can easily ruin the grown seedlings, the Agronom glasshouse allows maintain a favorable microenvironment much better than any available tools commonly used by gardeners.
Description of the greenhouse "Agronom"
The structure of the greenhouse is frame of modern polymer materialwhich is already attached covering material.
This technical solution makes "Agronom" a ready-to-use product, not requiring when installing and using any special skills and technical knowledge.
Enough open the packaging and the product is ready to use. The arcs of the frame curved in the form of arches do not imply the use of a base, therefore a greenhouse can be installed without any preparatory actions anywhere in the suburban area.
The end portions of the covering material are used as an extension, which also simplifies the design.
The length of the greenhouse, depending on the number of arches included in the set, can be 4, 6 or 8 meters, the width of the greenhouse is sufficient to create two three beds and is about 1.2 m.
The height can vary from 0.7 to 0.9 m. Depending on the conditions of the assembly. Wherein product weight is minimal. Thus, a greenhouse with a length of 4 m. Weighs only 2 kg.
Let us consider in more detail the materials from which the greenhouse is made.
A photo
Photo gallery with greenhouse "Agronom":
Frame
The frame arcs are made of polyvinyl chloride (PVC) pipes with a diameter of 20 mm. This material has sufficient rigidity and, at the same time, allows to adjust the height and width of the structure within certain limits.
Pegs with a length of 200 mm, also made of PVC, are fixed at the pipe ends. With their help, "Agronomist" securely attached to the ground.
Plastic clips may also be included in the kit, allowing, if necessary, to fix covering material on the arcs in the raised position. However, the same function is easy perform clothespins suitable size.
Coating
In the greenhouse, Agrotex 42 fabric is used as a covering material. Unlike traditional polyethylene film, this material has a number of unique properties - it moisture and breathable, allows you to protect seedlings from sudden fluctuations in temperature.
These properties allow you to create favorable microclimate for plants.Cover width is 2.1 m.that, with a margin allows to block the frame of the greenhouse "Agronomist".
The length varies depending on the length of the product, the ends of the sheet are pressed to the ground when installed, which gives the structure stability. The method of fastening the coating to the arc allows the material is easy to move along the arches, which facilitates work with plants during weeding or watering.
Main advantages:
- Ease, compactness and durability in combination with low cost;
- Ability to install anywhere without using the base and with minimal effort;
- Yield increase by 50% compared with cultivation in open ground;
- Sustainable protection from adverse environmental influences (frosts down to -5 ° C, maintaining optimum humidity, protection from pests and small animals);
Based on all the above, we can conclude that the greenhouse "Agronomist" refers to high-tech modern products industrywhich can greatly facilitate the work of the gardener and significantly increase the yield.
