HOW TO USE ZIRCON FOR ORCHIDS: HOW TO PROPERLY USE THE DRUG AND DILUTE THE DESIRED DOSAGE, AS WELL AS HOW MANY MINUTES TO KEEP CUTTINGS OR SEEDS IN SOLUTION?

Orchid is a beautiful home flower that grows in nature in the tropical jungle.

Not so long ago, the plant became popular, so it is actively decorating the window sills in many homes. But in the care, the orchid is very capricious, so sometimes you have to resort to using a tool such as Zircon to boost the growth of a flower, speed up root formation and prolong its flowering.

What it is?

Zircon is a biostimulator that is suitable for processing not only orchids, but also other plants.. It is very effective, as a positive result is noticeable immediately after the first application.

Purpose of use

The drug Zircon has been actively used for the following purposes:

plant growth stimulation;
increasing the resistance of orchids;
adaptation to new growing conditions.

Advantages and disadvantages

Using Épin for orchid treatment has the following advantages:

reduction of rooting time;
stimulation of the formation of roots and flowers;
easy transfer of drought, cold, lack of light and excess moisture;
reduce the accumulation of heavy metals.

After using the drug flowers grow better, bloom more abundantly and feel much better.

The drug has a significant minus - overdose orchid leaves become enormous.

How to store the drug?

Store Zircon in a dark and dry place. The basement or storeroom is best suited where the temperature is not higher than 25 degrees Celsius.

The drug should be in a place inaccessible to children and animals. From the moment of issue it is possible to store the product for 3 years.

Differences from Appin and other supplements

Epin and Zircon - products that are actively used by growers to process their plants. And very often they believe that these two tools are identical, although this is completely wrong and that is why:

Epin is responsible for resistance to negative conditions and diseases. Zircon is used for active flowering, root formation and protection against viruses.
An overdose of Appin is not as scary as Zircon.
Under the action of light, Appin is destroyed, and Zircon is activated.
The plant absorbs and utilizes Zircon within 18 hours, and Appin - 14 days.
Zircon slowly spreads through the plant, and Appin - quickly, so that the first drug should be processed completely.
Epin digest the leaves, and Zircon - the root system. Therefore, the first drug is used for spraying, and the second - for irrigation.

Safety regulations

Biostimulator Zircon can not be called a dangerous substance. He was assigned a 4th hazard class for humans and warm-blooded animals. It does not pose a danger to bees and other beneficial insects, since it lacks phytotoxicity.

Its components do not accumulate in the soil and do not pollute surface water bodies, groundwater.

And although Zircon does not pose a threat to human life, The following precautions must be observed when working with it:

Work with chemicals only in rubber gloves, in a headdress, goggles and special clothing.
After processing, wash your clothes, rinse your mouth with water and take a shower with soap.
You can not eat, drink and smoke during processing.
You need to prepare the solution in a container, which you will then have to throw away.
In case of contact with the skin, wash it off with a large amount of water. When the drug penetrates the eyes, it is necessary to wash them with a solution of baking soda (10 g per 200 ml of water), then with clean water, while keeping them as open as possible. If the drug got into the stomach, then it can hurt him badly.
To neutralize the harmful effects of the drug, you need to drink 2-3 cups of water and cause a gag reflex. With the help of activated carbon it is possible to prevent intoxication.

Step by step instructions how to use

Features of zircon in its powerful anti-stress effect. The resulting solution is used for spraying the leaves, and not watering.

How to choose the dosage?

To prepare the solution, you need to connect 1 ampoule of the product with 5 liters of water. The resulting solution can not be stored longer than 5 days.

How to breed?

Dilute Zircon clearly according to instructions with boiled water at room temperature. subject to the following conditions:

Plant cuttings, immunity restoration and disease prevention. Keep the cuttings in the prepared solution for about 12 hours. Prepare the composition can be, if you combine 0.25 ml of the drug with 1 liter of water.
Plant picking in seed propagation. Processing Zircon is carried out to improve the resilience of seedlings. It should be carried out after the formation of 2-3 pairs of leaves. To obtain a solution dilute one ampoule of the drug in 10 liters of water.
Extra root processing of an adult flower during vegetation. Zircon improves the decorative qualities of the orchid, stimulates budding, growth of the root system and flower stalks. To prepare the solution, use the recipe as for picking. Watering is carried out every 2-3 weeks.
Processing plants after illness and pest attacks. Connect 10 liters of water and 1 ampoule of funds. Processing the resulting solution to perform until complete recovery.

To prepare the solution should not use tap water, as it has alkaline properties that will inhibit the action of Zircon.

When diluting the drug, add a little citric acid, which neutralizes the alkaline properties of water.

How to apply?

Zircon is a biostimulant that is used for foliar surface treatment of orchids.. Its active components are absorbed by all elements of the flower in the shortest possible time. The solution is distributed very quickly and has an instant effect.

Release the drug in the form of 1 ml ampoules. They contain a concentrated substance that must be diluted with all safety precautions. How to breed?

Carefully water the flower before processing Zircon.
It is best to use the method of immersion for irrigation, when the container with the plant is placed in a basin in hot water.
After this watering, you need to prepare a solution, depending on what result you want to achieve.
Pour the flower with the solution, wait for the glass to water.
Put the pot in the same place.

How many minutes to keep in the solution?

If the processing is carried out when cutting orchids, keep cuttings in solution for 18-24 hours.

If orchid seed reproduction occurs, the procedure will last 6-8 hours.

How often to repeat the procedure?

The frequency of manipulation depends on the purpose of the drug:

prevention - 1 watering every 1.5-2 months;
after stress (transplant, disease, pests) - spraying 1 time per week before the appearance, the visible result.

Dealing with the consequences

In case of an overdose, the leaves of the plant take on gigantic proportions, but it will be impossible to correct this consequence.

Today, specialty stores are overwhelmed with a huge number of different means for feeding and processing plants. To understand this choice of drugs that are suitable for your orchid, we suggest reading articles on such remedies as Fitoverm, Aktara, Bona Forte, succinic acid, Fitosporin, Cytokine paste and Agricola. We will also tell you about how to prepare fertilizers at home, what types of fertilizing orchids are and how to use them correctly.

Contraindications

Zircon is the first aid for orchids and novice florists, who, through ignorance and inexperience, decided to care for this capricious plant.

With the help of the drug can easily eliminate the effects of improper care.so it is impossible to water a completely healthy flower.

You can do this only once in 6 months for the purpose of prophylaxis, as well as for feeding the plant and normalizing its condition.

Alternative to chemical

In addition to Zircon, another Augustine remains a biostimulant.. They are similar in their action. Augustine is a natural growth regulator, is an immunostimulating and anti-stress drug. It is shown to improve the survival rate of the orchid after transplantation, as well as to enhance the formation of roots and prolonged flowering.

Zircon is a drug that has been actively used in floriculture for the prevention of disease, activation of flowering and root formation. In spite of such effectiveness, the solution should be used clearly according to the instructions, observing the dosage, otherwise the green mass will actively grow, acquiring large sizes.